Author Topic: Vertical Rudder May 2017  (Read 391 times)

Lee Shuckerow

  • Moderator
  • Extremely Active
  • **
  • Posts: 428
Vertical Rudder May 2017
« on: May 01, 2017, 06:34:30 PM »
If you haven't ordered the new vertical rudder try

Check what size your pintles are. The new vertical post have the larger pintles to handle the load presumably.

This is just an easy replacement of the rudder plate and something to do with the tiller, not sure on that yet. Four bolts, I recommend 1/4-20 bolts, and some 4200 and your done. I would sharpie around the old plate to try to match the same positioning for the new plate.
Jackpot  #235